What number should I set the pressure setting at on the Auto-Inflation (model UA-767) and Talking Auto-Inflation (model UA-767T)?
For the Auto-Inflation (model UA-767) and Talking Auto-Inflation (model UA-767T), you need to set the cuff inflation pressure switch to a number that is at least 30 mmHg higher than your expected systolic pressure.
For example, if you believe your blood pressure to be 140 (systolic) over 90 (diastolic) set the switch to 170.
What if I set it too high?
You will still receive an accurate reading, but your arm will be constricted longer and you may feel some discomfort.
What if I set it too low?
The cuff will automatically deflate and reinflate again to the correct pressure.
Also please be sure to consult your physician immediately if you have any doubt about your readings. Should a mechanical problem occur, contact LifeSource.